SupremeFX II audio card pinouts

SupremeFX II audio card pinouts

---

Pinouts for the Supreme fx II 10pin HD connector on the back of the module.

On Asus MB u must first go to bios and change front audio from HD or auto To Ac97

1 2 3 4 5

 _______
|0 0 0 0 0|
|0 X 0 0 0|                        the zeros are the pins  numbers  what each pin is.

________

6 7 8 9 10

1. Line out Left

2. No Connection

3. Line out Right

4. Micbiyes (not used in my case)

5. Mic In

Bottom Row

6. Return Left

7. BLANK NO PIN

8. Return Right

9. +5VA pos  (in my case not that vire)

10. -Ground

TO USE SINGLE PINS AC97 STANDART

For me worked out
1 mic            2 GND
3 mic bias   4 GND
5 R                6 R
7 none          8 NO pin on board
9 L                 10 L

ASUS ORGINAL SUPPORT PAGE COPY

The front panel audio header on an Intel® Desktop Board lets you connect to a front panel audio module built into a system chassis. This document describes the header pin-out configuration for connecting a chassis with Intel® High Definition Audio (HD Audio) or AC'97 audio. Note HD Audio headers are pin-compatible with AC'97 chassis and connectors. For HD Audio front panel modules Pin Signal Description Pin Signal Description 1 PORT 1L Analog Port 1 - left channel (Microphone) 2 GND Ground 3 PORT 1R Analog Port 1 - right channel (Microphone) 4 PRESENCE# Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is connected 5 PORT 2R Analog Port 2 - right channel (Headphone) 6 SENSE1_RETURN Jack detection return for front panel (JACK1) 7 SENSE_SEND Jack detection sense line from the Intel® HD Audio CODEC jack detection resistor network 8 KEY No pin 9 PORT 2L Analog Port 2 - left channel (Headphone) 10 SENSE2_RETURN Jack detection return for front panel (JACK2) For AC97 front panel modules Pin Signal Description Pin Signal Description 1 MIC Front panel microphone input signal (biased when supporting stereo microphone) 2 AUD_GND Ground used by analog 3 MIC_BIAS Microphone power / additional MIC input for stereo microphone support 4 AUD_GND Ground used by analog audio circuits 5 FP_OUT_R Right channel audio signal to front panel (headphone drive capable) 6 FP_RETURN_R Right channel audio signal return from front panel (when headphones unplugged) 7 AUD_5V Filtered +5 V used by analog audio circuits 8 KEY No pin 9 FP_OUT_L Left channel audio signal to front panel (headphone drive capable) 10 FP_RETURN_L Left channel audio signal return from front panel (when headphones unplugged)